Bonnet Poppetr Repair Kit for Febco 765-1 Pressure Vacuum Breakers And Backflow Preventers | 1 Inch And 1 1/4 Inch

The 905-212 Bonnet and Poppetr Repair Kit is designed for FEBCO 765-1 Inch & 1-1/4 Inch vacuum breakers and backflow preventers. Manufactured from the highest quality materials and built to upgraded OEM standards, this kit provides a strong seal, long life, and an affordable price. Before placing your order, please confirm that the model number #905-212 matches your requirements.

Specifications: - Dimensions: 2.952.95 1.77 inches - Weight: 4 ounces - Materials: Engineered plastic and brass

Included Components: - 1 x Bonnet Repair Kit - 1 x O-rings Dia. 2.65mm - 1 x Oil Bag

Installation Instructions: 1. Turn off the water supply, starting with the bottom ball valve, ensuring both ball valves on the 765-1 are in the closed position. 2. Turn the sprinkler controller on manually. 3. Unscrew the top nut and remove the brass canopy. 4. Take out the old Bonnet & Poppet. If it's too tight, use a wrench. 5. Place the new poppet inside the chamber. 6. Position the O-Ring around the Bonnet and hand-tighten the Bonnet into the PVB unit. 7. Replace the Canopy and tighten the nut on top using a wrench. 8. Open the water supply side ball valve first, then the second ball valve.

Note: - Do not force the parts. They should fit together freely. Excess force may cause damage and render the assembly inoperable. - In most cases, hand-tightening is sufficient to install this bonnet & poppet replacement. - In the rare event that the bonnet part cannot be tightened into the vacuum breaker, apply the included grease on the threading and use a wrench on the two pits on the outer ring of the bonnet part to tighten it as needed.

This Bonnet & Poppet kit is designed to break when ice forms inside the sprinkler system, protecting the system from total damage. It is recommended to drain and empty the water inside the sprinkler system in advance during icy weather to avoid any potential issues.

Compatibility: Please note that the 1" and 1-1/4" designations refer to the original 765 valve model, not the outside diameter of the bonnet parts. The outside diameter of this Bonnet and Poppetr Repair Kit is approximately 2" for FEBCO 765 model 1" and 1-1/4" valves. This is a replacement part for the original part number 905212 FRK 765-BP 1-1 1/4 bonnet poppet assembly.

Premium Quality: The vandal/tamper-resistant brass canopy and test cocks ensure trouble-free performance. The engineered plastic and brass internal parts resist chemical and mineral deposit buildup.

Our Guarantee: We stand by the quality of our products. If you encounter any issues or have questions, please reach out to us immediately. Your satisfaction is our top priority, and we're here to assist you every step of the way.

product information: